Pneumatic Actuator Selection Information of Jiangsu Fushan Valve Co., Ltd. The AT pneumatic actuator is an actuator that converts the input air pressure signal into 90 degrees and outputs it in a twisted rectangular form. This series of pneumatic actuators is an actuator structure with small appearance and high performance, which is divided into two types: dual pneumatic control type and single pneumatic control type

In steam energy-saving technology, the use of high pressure transmission and low pressure is a basic principle. Low pressure use can provide a greater proportion of latent heat in steam, reduce the heat content of condensed water, reduce the amount of secondary steam, and have a higher dryness. There are many industries using pressure reducing valves in China, but there are also many

Analysis of the current development situation and trend prediction of the valve industry Valve is an important fluid control equipment in industry, involving many departments of the national economy, and is an important basic equipment for the development of the national economy. In recent years, our company's performance has grown rapidly. After years of development, great progress has been made in valve research and development technology

Precautions for Fushan valve piping: 1. Before piping, check the valve for debris and oil stains, and if any, remove them first. 2. The inner and outer burrs and corners of the flange surface should be removed and chamfered. 3. Conduct leak testing after piping. 4. When opening the valve in the steam pipeline, first open it a bit, then stop it and let the steam enter the pipeline for preheating before slowly opening the Fushan valve

Features: 1. It has a check valve with empty opening and closing speeds, which can be adjusted to the optimal opening or closing speed in cooperation with the site when starting or stopping the pump operation. 2. It can be used in high-rise buildings to reduce the occurrence of water hammer and achieve the effect of quiet opening and closing. 3. FS300X valves are recommended for horizontal installation. 4、

Overall Dimensions (Suzhou Fushan Valve Business Center Technical Department) Material Description Valve Body Material: Forged Brass Valve Stem Material: Stainless Steel ALSL302 Sealing Material: Nitrile Rubber NBR Driver Chassis: Die Cast Aluminum Alloy Driver Cover: Flame Retardant ABS Engineering Plastic Working Medium: Water Medium Temperature: Less than

2 Fan coil valve DN15... 253 Fan coil valve DN15... 25 Angular stroke actuator switch control (AC230V) for 2-way and 3-way fan coil valves Applications for HVAC system Fan coil control Product features simple and direct installation through a long bolt

System control: The system variable electric two (three) way valve shown in the figure is applied to the control system of a two pipe cold/hot water dual purpose air handling unit together with various drivers. The system mainly consists of a proportional plus integral temperature controller, a temperature sensor installed in the return air duct, an electric regulating valve, and drivers. The function of the controller is to